Installation method
Technical installation conditions for sectional garage doors
EasyClick 200 is applied when the space above the opening, on the inside, is larger than 200 millimeters. Then the springs are placed above the door.
In case the space on the inside is less than 200 mm, the EasyClick 70 door mounting system is used. In this case, the minimum space above the opening must be 70 mm for manual operation and 110 mm for motor drive.
A minimum dimension of 100 mm in the width of the free space on both sides from the inside applies to both systems.
If there are no conditions for installation, it is possible to make a suitable substructure and panel mask, to enable installation.
