Roof panels

Fast installation of roof panels and their long service life with easy maintenance qualify this type of roof covering as extremely economically justified. Excellent heat penetration coefficient from 0.50 to 0.14 W / m2K satisfies all calculations and requirements of energy efficient construction.

Due to such good characteristics, for more than a decade, Rolomatik, in partnership with Kingspan, has been designing and installing thermally insulated sandwich panels.

The panels are made of galvanized and plasticized steel sheets with a filling of stone wool and Isophenic. For roof slopes of at least 4 ° (7%), panels with IPN filling (Isophenic) are used, which range in thickness from 40 to 160 mm. The minimum slope for stone wool panels is 6 ° (10%). The thickness of such panels ranges from 60 to 200 mm. The maximum length of both types of roof panel is 14500 mm, but they can be continued face to face with the use of appropriate folds and sealing strips.

Both types of roof panels have fire certificates (IMS) for 30 to 120 minutes.

The application of panels is wide, from production halls and cargo centers to canopies, garages and administrative buildings.

Rolomatik in cooperation with Kingspan offers a wide range of trapezoidal and flat roof panels with polyurethane and mineral wool filling.

KS1000 RW

KS1000 RW is a trapezoidal roof system that uses a visibly hanging fastening method and is suitable for construction applications where the roof pitch is 4 ° and more (7%), for roofs where the panels are placed from ridge to eaves. The KS1000 RW panel is also often used as a wall covering.

KS1000 XD (X-DEK)

KS1000 XD (X-DEK) is a roof panel designed for the construction of flat roofs of large spans and is a modern alternative to stacked roof systems.
It is intended for flat roofs with a minimum slope of 1%. It is produced in four variants of the upper final layer.

KS1000 TOP-DEK

KS1000 TOP-DEK membrane roof panel system that uses an internal fastening platform, fastening directly to the structure. It is suitable as a flat roof for construction applications where the roof pitch is 0.5 ° and more (1%), for roofs where the panels are installed from the ridge to the eaves. The panel is also used for curved roofs with the following minimum radius:

Curved roofs placed from eaves to eaves – 50 meters minimum radius
Curved roofs set from gable to gable – 20 meters minimum radius

KS1000 FF

KS1000 FF is a trapezoidal roof system that uses a visibly suspended fastening method and is suitable for construction applications where the roof pitch is 5 ° and more (8.5%), for roofs where the panels are installed from the ridge to the eaves. KS1000 FF has an increased level of fire resistance and can also be used as a wall covering.

KS1000 RT

KS1000 RT tile panel roof system that uses a visibly hanging fastening method and is suitable for construction applications where the roof pitch is 12 ° and more (21%), for roofs where the panels are installed from the ridge to the eaves.

The roof panels are made of galvanized and plasticized steel sheets with a filling of stone wool or Isophenic. For roof slopes of at least 4 ° (7%), panels with IPN filling (Isophenic) are used, which range in thickness from 40 to 160 mm. The minimum slope for stone wool panels is 6 ° (10%). The thickness of such panels ranges from 60 to 200 mm. The maximum length of both types of roof panel is 14500 mm, but they can be continued facing each other with the use of appropriate folds and sealing strips.

You can see the catalog of panels with detailed characteristics here.

KS1000 RW trapezoidal roof system

d – filling thickness (mm)	25	40	50	60	70	80	100	120
D – overall dimension (mm)	60	75	85	95	105	115	135	155
Weight (kg/m²), coating 0,5/0,4 mm	9,34	9,94	10,34	10,74	11,14	11,54	12,34	13,15

KS1000 X-DEK panels for flat roofs of large spans

d – filling thickness (mm)	80	100
D – overall dimension (mm)	188	208
Weight (kg/m²), steel 0,9/0,7 mm	21,4	22,2
Weight (kg/m²), TR20	15,9	16,8
Weight (kg/m²), TR27	15,8	16,7

KS1000 TOP-DEK membrane roofing system

d – filling thickness (mm)	20	50	60	70	80	100
D – overall dimension	50	80	90	100	110	130
Weight (kg/m²) PVC membrane – outside Sheet metal 0,6 mm – inside	8,66	9,86	10,26	10,66	11,06	11,86